Details:
- 2 Inch Overcenter Buckle Tie-Down
- Black Rubber Protective Pad Under Buckle
- COB2S-3M 2 Inch Stainless Steel Overcenter Buckle
- Stainless Steel CFBP175S-5M Angled bolt plate, bend angle up, on each end, Adjustable strap has two 12 inch protective sleeves
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW2-Y6PE 2 Inch 6M Yellow Polyester Tie-Down Webbing
- 4000 lb Break Strength
- 1,333 lb Working Load Limit
- Assembled in the USA
Product Weight: 2.04 lb
$45.99 Each
10+ = $41.81
50+ = $37.73
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Overcenter Tie-down, Bolt Plate On Both Ends
- 2 Part Overcenter Buckle Tie-down Has A Fixed End And A Separate Adjustable Strap. The Fixed End Is Sewn At A Specific Length And Is Not Adjustable. The Adjustable Strap Is Fed Through The Buckle And The Length Can Be Adjusted As Needed Until Tightened
- The Overcenter Buckle Is A Clasping Buckle That Provides A Small Amount Of Tension As It Is Closed
- Bolt Anchor Plate Is Sewn On The End Of Both The Fixed And Adjustable Strap
- Both Bolt Plates Are Orientated, Bend Facing Up, Relative To The Buckle Lying Flat
- Protective Pad Is Placed Under The Buckle To Help Prevent The Buckle From Scratching Its Surroundings
- Two 12 Inch Inch Protective Sleeves Are Placed On The Strap To Provide Added Wear Protection For The Primary Strap. Each Sleeve Can Independently Be Adjusted Along The Length Of The Strap
- Commercial Duty Overcenter Buckle For Great Strength And Durability
- Overcenter Buckle Has A Push Button Release For The Lever Arm In The Front Of The Buckle. This Buckle Also Has A Roller Bar At The Hinge Point To Make Pulling The Slack Out Of The Strap Easier
- Overcenter Buckle Is Made Of 304 Grade Stainless Steel
- Overcenter Buckle Has A Latching Locking Mechanism Controled By A Spring Loaded Button
- Commercial Duty Bolt Plate For Great Strength And Durability
- Bolt Plateds Are Made Of 304 Grade Stainless Steel
- Bolt Plate Has A Bolt Mounting Hole 0.61 Inch Diameter
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As Only The Webbing Portion, The Buckle And Hook Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Webbing Is 2 Inches Wide, But The Bolt Plates Are Designed For 1.75 Inch Wide Webbing
- CustomTieDowns Strap Warning Tag Sewn On The Strap Next To The Flat Hook
- Protective Sleeves Are Made Of High Abrasion Resistance Nylon
- Overcenter Buckles Must Be Loaded Correctly For The Buckle To Function Properly And Hold Its Tension. Although Most Overcenter Buckle Tie-downs Are Loaded In A Similar Way, Each Style Of Buckle Can Have A Slightly Unique Loading Procedure. Always Check The Proper Operatining Instructions For Your Specific Overcenter Buckle
Variations of Product Type 11559
There are no variations of Product Type 11559 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 1 arrow_forward Group = 4 arrow_forward Layout = 18 arrow_forward Config = 4490 arrow_forward Family = 4843 arrow_forward Type = 11559
Top = 1 arrow_forward Group = 4 arrow_forward Layout = 18 arrow_forward Config = 4490 arrow_forward Family = 4843 arrow_forward Type = 11559
