Details:
- 1 Inch Retractable Ratchet Strap
- Orange Polyester Webbing On Fixed End
- 9 inch flat sew loop on fixed end, CHSRC1V-1M Vinyl Coated S Hook with Retainer Clip on both adjustable end
- Fixed End 1.083 Ft (13 Inches)
- Adjustable Strap 6 Ft
- Total Strap Length 7.083 Ft (85 Inches)
- CW1-K1SB 1 Inch 1M Black 5-Panel Polyester Seatbelt Style Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 2.11 lb
$30.89 Each
10+ = $28.04
50+ = $25.30
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Retractable Ratchet Strap, Flat Sewn Loop On One End, S Hook With Retaining Clip On The Opposite End
- Retractable Ratchet Strap Configuration With A Fixed End Strap Connected To The Back Of The Buckle And An Adjustable Strap Wound Up And Contained In The Ratchet Buckle
- The Adjustable Strap Is Contained In The Retractable Mechanism Until It Is Pulled Out To The Desired Length
- 9 Inch Flat Sewn Loop Sewn On The Fixed End Of The Tie-down
- 9 Inch Flat Sewn Loops Are Formed By Folding The Webbing Flat Over Onto Itself, The Loop Has No Twisting, Pinching Or Narrowing
- 9 Inch Loop Has A Circumference Of 18 Inches And Can Fit Over A 5.5 Inch Diameter Bar
- S Hook With Retainer On The End Of The Adjustable Strap
- The S Hook Has A Built In Retainer Clip That Holds The Hook In Place After Attachment And Helps Prevent Unintentional Disconnects
- The S Hook Opening Faces Down In Relation To The Buckle And Fold.
- Commercial Duty Ratchet Provides Great Strength And Durability
- Ratchet Is Made Of Steel And Has A Zinc-yellow Plated Finish. The Ratchet Has A Red Plastic Base And A Black Plastic Cover Over The Retractable Mechanism
- Ratchet Has A Standard Retractable Locking Mechanism
- Ratchet Has A Thumb Style Handle With Black/red Comfort Grip
- Commercial Duty S Hook With Retainer Clip Provides Great Strength And Durability
- S Hook Is Made Of Steel And Has A Black Vinyl Coating. The Retainer Clip Is Made Of Steel And Has A Zinc-silver Plating
- S Hook With Retainer Clip Is A Standard S Hook, But The Retainer Clip Reduces The Clearance Of The Hook Down To 0.30 Inch When Pressed Inward Toward The Bottom Of The Hook. Always Check That The Attachment Point Will Allow The Retainer Clip To Move Freely And Close After Attachment
- Adjustable Strap Is Made With 1800 Lb Polyester Seatbelt Style Webbing
- Sewn With Silver Polyester Thread
- The Fixed End Length Is Measured From The Back Of The Buckle To Tip Of The Sewn Loop. The Adjustable Strap Length Is Measured From The Back Of The Buckle To The Tip Of The S-hook When The Strap Is Fully Extended From The Buckle
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Sewn Loop End Of The Fixed End Strap
- Fixed End Strap Is Made With 3000 Lb Polyester Tie-down Webbing
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 11929
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 11950 | Made With A Custom Printed Strap Tag |
PRODUCT MODELING
Top = 1 arrow_forward Group = 48 arrow_forward Layout = 222 arrow_forward Config = 4566 arrow_forward Family = 4949 arrow_forward Type = 11929
Top = 1 arrow_forward Group = 48 arrow_forward Layout = 222 arrow_forward Config = 4566 arrow_forward Family = 4949 arrow_forward Type = 11929
