Details:
- 1.5 Inch Ratchet Strap
- CRW15-4M 1.5 Inch Ratchet With Wide Handle
- Combination CHSRC1V-3M Vinyl Coated S Hook with Retainer Clip and Sewn-on CHD15-4M D-ring on fixed end, 4 Inch Flat sewn loop on end of adjustable strap
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW15-Y4PE 1.5 Inch 4M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.74 lb
$17.29 Each
10+ = $15.65
50+ = $14.13
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ratchet Strap, Combination S Hook With Retainer Clip And D-ring On One End, Flat Sewn Loop On The Opposite End
- Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
- S Hook With Retainer Clip Sewn-on 15 Inches After The Sewn On D-ring On The Fixed End Strap
- Retainer Clip On The S Hook Helps Prevent Unintentional Disconnects
- S Hook With Retainer Clip Can Be Used Independently Or In Combination With The D-ring
- Most Commonly, The S Hook End Is Wrapped Around An Anchor Point And Connected To The D-ring To Form A Soft Loop
- 4 Inch Flat Sewn Loop On The End Of The Adjustable Strap
- Flat Sewn Loops Are Formed By Folding Over The Webbing Flat On Top Of Iteself, No Twisting, Pinching Or Narrowing Of The Webbing
- 4 Inch Flat Sewn Loops Have A 8 Inch Circumference And Can Comfortably Fit Over A 2.5 Inch Diameter Round Bar
- Commercial Duty Ratchet For Great Strength And Durability
- Ratchet Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Ratchet Has The Standard Single Locking Configuration
- Ratchet Has A Wide Handle To Make Operation While Wearing Gloves Easier
- Heavy Duty S Hook With Retainer Clip For The Highest Strength And Durability
- S Hook On The Fixed End Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent Scratching The Surroundings. It Has A Spring Load Retainer Clip That Is Plated In Zinc-silver Finish
- S Hook With Retainer Clip Has A 0.35 Inch Hook Opening Clearance When The Retainer Clip Is Pressed Inward
- D-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Commercial Duty D-ring For Great Strength And Durability
- Strap Is Made With 4500 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Fixed End Length Is The Length Of Webbing Between The Ratchet And D-ring, Soft Loop Extenstion Is Not Included In The Measurement. Adjustable Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop
- Product Is Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Adjustable Strap Next To The Flat Loop
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 12095
There are no variations of Product Type 12095 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
