Details:
- 2 Inch Strap
- 1 Inch Flat sewn loop on one end, CHTH-7M Forged Snap Hook on opposite end
- Total Strap Length 16 Ft (192 Inches)
- CW2K-Y12PE 2 Inch 12M Yellow Polyester Tie-Down Webbing With Black Edges
- 7500 lb Break Strength
- 2,500 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.64 lb
$16.89 Each
10+ = $15.33
50+ = $13.83
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Strap Extender, Flat Sewn Loop On One End, Snap Hook On Opposite End
- Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
- 1 Inch Flat Sewn Loop On One End, Forged Eye Snap Hook On The Opposite End
- 1 Inch Flat Loop Can Be Attached To A Bolt Or To The Pin Inside A Boat Winch
- 1 Inch Flat Loops Have A Diameter Of 2 Inches And Can Fit Over A 1/2 Inch (0.50) Inch Diameter Bolt Or Pin
- Forged Eye Snap Hook Has A Retainer Clip That When Engaged Helps Prevent Unintentional Disconnects
- Commercial Duty Forged Snap Hook For High Strength And Durability
- Forged Snap Hook Is Made Of Steel And Has A Zinc-silver Plated Finish
- Snap Hook Is Forged, Slightly Thicker Than The Flat Version, And Is Orientated Parallel With The Strap Once Sewn
- Strap Is Made With Extra Heavy Duty 12000 Lb Polyester Tie-down Webbing. Webbing Nominal Thickness Is 0.08 Inch (2mm)
- Sewn With White Polyster Thread
- Strap Length Is Measured As The Webbing Portion Only Including The Flat Sewn Loop, The Hook Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Webbing Eye Of The Snap Hook Has Less Than A 1 Inch Opening, But The Webbing Is 2 Inches Wide. Webbing Is Necked Down To Fit Through The Eye And Sewn
- CustomTieDowns Strap Warning Tag Sewn On The Hook End Of The Strap
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW2K-Y12PE | 2 Inch 12M Yellow Polyester Tie-Down Webbing With Black Edges | 12,000 lb | 4,000 lb |
| CHTH-7M | 7M Forged Eye Snap Hook, Zinc-silver | 7,500 lb | 2,500 lb |
- If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
PRODUCT MODELING
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 163 arrow_forward Config = 2329 arrow_forward Family = 2330 arrow_forward Type = 4435
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 163 arrow_forward Config = 2329 arrow_forward Family = 2330 arrow_forward Type = 4435
