Details:
- 1 Inch Cinch Cam Buckle Tie Down
- No Strap Tag
- CS1K-1M 1 Inch Black Zinc Diecast Cam Buckle
- 3/4 Inch flat Sewn Loop on fixed end, Adjustable strap has a 3/4 inch flat sewn loop on the end and a pull loop near the buckle
- Fixed End 0.17 Ft (2 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.17 Ft (62 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 600 lb Break Strength
- 200 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.34 lb
$8.79 Each
10+ = $7.95
50+ = $7.17
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Flat Sewn Loop On Both Ends
- One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
- 3/4 Inch Flat Sewn Loop On The End Of Both The Fixed End And Adjustable Strap
- Flat Sewn Loops Are Formed By Folding The Webbing Flat Over On Top Of Itself, There Is No Twisting, Narrowing Or Pinching Of The Webbing
- The 3/4 Inch Length Is Measured When The Loop Is Lying Flat, It Is Equivalent To Approximately 1/2 The Circumference
- The 3/4 Inch Loop Can Fit Over A 0.375 Inch Diameter Round Bolt
- Cinch Style Cam Buckle Has The Is Fed From The Bottom Side Of The Buckle Up Through The Teeth And Pull From The Top Side Of The Buckle
- Cam Buckle Frame Is Made Of Zinc-diecast Material And Has A Black Resin Finish
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loop, The Cam Buckle Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Sewn With The Smallest Tie-down Stitch
- Product Has No Strap Tag Or Labels Sewn On
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 1970
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 1971 | Black Thread Color |
PRODUCT MODELING
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 3 arrow_forward Config = 629 arrow_forward Family = 629 arrow_forward Type = 1970
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 3 arrow_forward Config = 629 arrow_forward Family = 629 arrow_forward Type = 1970
