Details:
- 1 Inch Ladder Lock Tie-down
- No Strap Tag, Black Thread
- CFLLP1K-1C 1 Inch Black Plastic Ladder Lock Buckle
- CHSSHPU1K-7X Black plastic Swiveling Snap Hook on each end
- Fixed End 0.33 Ft (4 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.33 Ft (64 Inches)
- CW1-R8PP 1 Inch Heavyweight Red Polypropylene Webbing
- Assembled in the USA
Product Weight: 0.13 lb
$6.29 Each
10+ = $5.65
50+ = $5.10
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ladder Lock Tie-down, Swiveling Snap Hook On Each End
- Two Part Ladder Lock Tie-Down, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Slots In The Buckle And Tightened During Use
- Ladder Lock Buckles Have Three Slotted Openings With The Front Noted By A Flatter Flange Area
- Ladder Locks Have The Adjustable Strap Fed Up Through The Middle Slot And Back Under And Through The Front Slot
- The Ladder Lock-strap Combo Pinches The Webbing Once Tightened To Help Prevent The Strap From Sliding Back Out Of The Buckle
- Swivel Snap Hook Sewn On The End Of Both The Fixed And Adjustable Straps
- Swivel Snap Hooks Rotate A Full 360 Degrees
- Swivel Snap Hooks Have A Built In Retainer Clip That Once Latched Helps Prevent Unintentionaly Disconnects
- Light Duty Ladder Lock Buckle For Light Commercial And General Applications
- Ladder Lock Buckle Is Made Of Black Plastic Material
- Light Duty Swivel Snap Hooks For General And Light Commercial Applications
- Swivel Snap Hooks Are Made Of Black Plastic Material
- Strap Is Made With Heavyweight Polypropylene Webbing
- Sewn With Black Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
- Sewn In The Standard Method To Allow The Strap To Function Correctly
- No Strap Tag Or Labeling On The Product
- No Instruction Sheet Included
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 3006
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 13174 | End-fitting/hook Is Made Of 304 Grade Stainless Steel |
PRODUCT MODELING
Top = 1 arrow_forward Group = 29 arrow_forward Layout = 59 arrow_forward Config = 4706 arrow_forward Family = 5139 arrow_forward Type = 3006
Top = 1 arrow_forward Group = 29 arrow_forward Layout = 59 arrow_forward Config = 4706 arrow_forward Family = 5139 arrow_forward Type = 3006
