Details:
- 1 Inch Ratchet Strap
- CR1K-1M 1 Inch Black Ratchet With Standard Handle
- 6 Inch Sewn Loop with 1/2 twist on each end
- Fixed End 0.83 Ft (10 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.83 Ft (70 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 1500 lb Break Strength
- 500 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.68 lb
$10.09 Each
10+ = $9.09
50+ = $8.21
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ratchet Strap, Sewn Loop With 1/2 Twist On Both Ends
- Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
- 6 Inch Sewn Loop With A Half Twist On The End Of Both The Fixed End And Adjustable Strap
- Sewn Loop With Half Twist Is Formed By Folding Over The Webbing And Twisting The Webbing Over One Time, Then Sewn. The Half Twist Orientates The The Loop Perpendicular From The Webbing Lying Flat
- The Loop Is Not Pinched Or Narrowed, Only 1/2 Twisted. The Tip Of The Loop Is Still The Same Width As The Webbing
- The 6 Inch Loop Length Has A Circumference Of 12 Inches And Can Comfortably Fit Over A 3.75 Inch Diameter Round Bar
- Commercial Duty Ratchet For Great Strength And Durability
- Ratchet Is Made Of Steel And Has A Black Resin Finish
- Ratchet Has The Standard Single Locking Mechanism
- Ratchet Has A Thumb Handle, The Most Compact Style Available
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loop, The Ratchet Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Listed Strength Rating
- CustomTieDowns Strap Warning Label Sewn On The Loop End Of The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 3038
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 8300 | Buckle Has A Zinc-Yellow Plated Finish |
