Details:
- 1 Inch Endless Loop Strap
- No Strap Tag, CS1Z-5C Cinch Cam Buckle
- CHD1N-7C d ring sewn in 5 inches from the cam buckle
- Total Strap Length 4 Ft (48 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 500 lb Break Strength
- 167 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.29 lb
$6.69 Each
10+ = $5.98
50+ = $5.39
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Specialty Straps, Cam Buckle Tie-down, Endless Loop, D-ring On The Strap
- Cam Buckle Belt Strap Configuration, Cam Buckle On One End, D Ring Sewn On After The Cam Buckle, Endless Loop
- Endless Loop Belt Configuration Functions By Bringing The Loose End Of The Strap Back To The Cam Buckle And Feeding Through The Teeth
- Cinch Cam Buckle Is Pulled Tight By Hand, No Built In Mechanical Tightening Mechanism
- Strap Is Fed Thru The Cinch Cam Buckle From Bottom Teeth Opening Thru To The Top Of The Buckle, Never Feed The Strap Top To Bottom
- D-ring Is Sewn 5 Inches After The Cam Buckle And Can Be Used As A Hook-on Point
- Standard Duty Cinch Cam Buckle For General Uses
- Cinch Cam Buckle Is Zinc-diecast, Made Of Zinc, And Has A Zinc-silver Finish. Zinc Diecast Material Is Rust Proof
- Standard Duty D Ring For General Usage
- D-ring Is Made Of Steel And Has A Nickel Plated Finish (silver Color)
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As Webbing Portion Only, The Cam Buckle Is Not Included In The Measurement
- Sewn In The Standard Method To Function As Intended
- No Strap Warning Tag Or Labeling On The Product
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW1-Y3PE | 1 Inch 3M Yellow Polyester Tie-Down Webbing | 3,000 lb | 1,000 lb |
| CHD1N-7C | 1 Inch Wire D Ring, Nickel Plated | 700 lb | 233 lb |
| CS1Z-5C | 1 Inch Cinch Style Zinc Diecast Cam Buckle | 500 lb | 167 lb |
- Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength
Available Product Variations
There are no additional product variations currently available.
For help finding another option, contact customer service at sales@customtiedowns.com or 1-877-360-5528.
PRODUCT MODELING
Top = 2 arrow_forward Group = 2 arrow_forward Layout = 103 arrow_forward Config = 4992 arrow_forward Family = 5654 arrow_forward Type = 34786
Top = 2 arrow_forward Group = 2 arrow_forward Layout = 103 arrow_forward Config = 4992 arrow_forward Family = 5654 arrow_forward Type = 34786
