Details:
- 1.5 Inch Fixed End Strap
- CHJ15-4M Double J Wire Hook With sliding CHD15-4M D Ring on one end, one inch bolt loop (when laid flat) sewn on the opposite end
- Total Strap Length 2 Ft (24 Inches)
- CW15-Y4PE 1.5 Inch 4M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.45 lb
$6.99 Each
10+ = $6.31
50+ = $5.69
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, J Hook With D-ring Combination On One End, Flat Sewn Loop On The Opposite End
- Strap Extender Configuration, No Buckle Or Tightening Device, Only A Strap With A Double J Hook One End, Sliding D-ring On Middle Of Strap And 1 Inch Flat Sewn Loop On Opposite End
- Double J Hook Is Sewn On The Strap Orientated, Hook Facing Down, Relative To The Fold And Stitching
- Double J Hook Has Is Formed By Bending A Single Piece Of Wire In The Shape Of A J And Both Ends Of The Wire Are Brought Together To Form The Tip Of The Hook
- Sliding D-ring In The Middle Of The Strap
- J Hook And D-ring Are Typically Used Together, J Hook End Wraps Around An Anchor Point And Hooks Into The D-ring To Create A Loop
- 1 Inch Flat Sewn Loop Is Formed By Folding Over The Webbing Flat Onto Itself, No Twisting, Narrowing Or Pinching Of The Strap
- 1 Inch Flat Sewn Loop Length Has A 2 Inch Circumference And Can Comfortably Fit Over A 1/2 (0.50) Inch Diameter Round Bar Or Bolt
- This Product Is Commonly Used As A Replacement Fixed End Strap For A Tie-down. The Flat Loop Is Connected To The Bolt On The Back Of A Ratchet Or Buckle
- Commercial Duty Double J Hook For Great Strength And Durability
- Double J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Commercial Duty Wire D-ring For Great Strength And Durability
- Wire D-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Strap Is Made With 4500 Lb Polyester Tied-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured From The Inside Edge Of The J Hook To The Tip Of The Flat Sewn Loop
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CTD Strap Warning Label Sewn On The Loop End Of The Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 4741
There are no variations of Product Type 4741 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
