$6.39 Each
10+ = $5.73
50+ = $5.17
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, J Hook On One End, Flat Sewn Loop On Opposite End
- Strap Extender Configuration, No Buckle Or Tightening Device, Only A Strap With A Double J Hook One End And 1 Inch Flat Sewn Loop On Opposite End
- Double J Hook Is Sewn On The Strap Orientated, Hook Facing Down, Relative To The Fold And Stitching
- Double J Hook Has Is Formed By Bending A Single Piece Of Wire In The Shape Of A J And Both Ends Of The Wire Are Brought Together To Form The Tip Of The Hook
- 1 Inch Flat Sewn Loop Is Formed By Folding Over The Webbing Flat Onto Itself, No Twisting, Narrowing Or Pinching Of The Strap
- 1 Inch Flat Sewn Loop Length Has A 2 Inch Circumference And Can Comfortably Fit Over A 1/2 (0.50) Inch Diameter Round Bar Or Bolt
- The Product Is Commonly Used A Replacement Fixed End Strap For A Ratchet Strap
- Commercial Grade Double J Hook For Great Strength And Durability
- J Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protectioin
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured From The Inside Edge Of The J Hook To The Tip Of The Flat Sewn Loop
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CTD Strap Warning Label Sewn On The Hook End Of The Strap
- Product Is Not A Sling Nor Rated For Use As A Sling. Do Not Use For Lifting Or Personal Restraint.




Variations of Product Type 4752
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
Variation ID | Variation Difference |
---|---|
9106 | End-fitting/hook Is Made Of 304 Grade Stainless Steel |