Details:
- 2 Inch Strap
- CHSH2-6M Flat Snap Hook With sliding CHD2-5M D Ring on end, one inch flat sewn loop on the opposite end
- Total Strap Length 2 Ft (24 Inches)
- CW2-Y6PE 2 Inch 6M Yellow Polyester Tie-Down Webbing
- 4000 lb Break Strength
- 1,333 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.63 lb
$10.09 Each
10+ = $9.09
50+ = $8.21
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
SPECIAL WARNINGS:
- Tie-downs, Strap Extender, Snap Hook With D-ring On One End, Flat Sewn Loop On The Opposite End
- Strap Extender Configuration, No Buckle Or Tightening Device, Only A Strap With A Flat Snap Hook On One End, Sliding D-ring On Middle Of Strap And 1 Inch Flat Sewn Loop On Opposite End
- Flat Snap Hook Sewn On The End Has A Built In Retainer Clip To Help Prevent The Hook From Disconnecting
- Sliding D-ring In The Middle Of The Strap
- Snap Hook And D-ring Are Typically Used Together, Snap Hook End Wraps Around An Anchor Point And Hooks Into The D-ring To Create A Loop
- 1 Inch Flat Sewn Loop Is Formed By Folding Over The Webbing Flat Onto Itself, No Twisting, Narrowing Or Pinching Of The Strap
- 1 Inch Flat Sewn Loop Length Has A 2 Inch Circumference And Can Comfortably Fit Over A 1/2 (0.50) Inch Diameter Round Bar Or Bolt
- This Product Is Commonly Used As A Replacement Fixed End Strap For A Tie-down. The Flat Loop Is Connected To The Bolt On The Back Of A Ratchet Or Buckle
- Commercial Duty Flat Snap Hook For Great Strength And Durability
- Flat Snap Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protectioin
- Commercial Duty D-Ring For Great Strength And Durability
- Wire D-ring Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured From The Inside Edge Of The J Hook To The Tip Of The Flat Sewn Loop
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CTD Strap Warning Label Sewn On The Loop End Of The Strap
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW2-Y6PE | 2 Inch 6M Yellow Polyester Tie-Down Webbing | 6,000 lb | 2,000 lb |
| CHD2-5M | 2 Inch 5M Wire Formed D Ring | 5,000 lb | 1,667 lb |
| CHSH2-6M | 2 Inch 6M Flat Snap Hook, Zinc-Yellow | 6,000 lb | 2,000 lb |
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Available Product Variations
There are no additional product variations currently available.
For help finding another option, contact customer service at sales@customtiedowns.com or 1-877-360-5528.
PRODUCT MODELING
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 725 arrow_forward Config = 1467 arrow_forward Family = 1499 arrow_forward Type = 4763
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 725 arrow_forward Config = 1467 arrow_forward Family = 1499 arrow_forward Type = 4763
