Details:
- 2 Inch Cam Buckle Fixed End
- CB2-3M Utility Cam Buckle
- Two CHS1V-3M Vinyl Coated S Hooks on end of fixed end strap
- Total Strap Length 1 Ft (12 Inches)
- CW2-Y6PE 2 Inch 6M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.54 lb
$14.19 Each
10+ = $12.87
50+ = $11.61
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Fixed End, Two S Hooks On One End
- Cam Buckle Fixed End Configuration, Fixed End Only, Does Not Include The Adjustable Strap
- Cam Buckles Are Used By Feeding A Strap Through The Cam Teeth And Pulling The Strap Tight By Hand
- Utility Style Cam Buckle Is Loaded From Behind Or From The Underside Of The Teeth And Fed Through The Front, Then Pulled Tight
- Two S Hooks Are Sewn On The Same End Of The Strap
- S Hooks On The End Are Orientated So The Hook Openings Face Opposite Directions
- Commercial Duty Utility Cam Buckle For Great Strength And Durabilty
- Cam Buckle Is Made Of Steel And The Frame Has A Zinc-yellow Plated Finish. The Cam Trigger Has A Zinc-silver Plated Finish
- Heavy Duty S Hooks For The Highest Strength And Durability
- S Hooks Are Made Of Steel And Have A Black Vinyl Coating To Help Prevent The Hook From Scratching The Surroundings
- S Hooks Are The Standard S Hook Configuration, One Closed End, One Open Hook End. The Open Hook End Has A Diameter Larger Than 1 Inch To Fit Over A 1 Inch Diameter Bar Such As A Handlebar
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Are Measured As Only The Webbing Portion, Buckle And Hooks Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CTD Strap Warning Tag Sewn On The Hook End Of The Strap
- Utility Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Back Through The Front In Order To Properly Hold The Strap After Tightening. The Strap Can Be Loaded From The Middle Opening On The Bottom Of The Buckle And Fed Through The Teeth Back To Front Also. NEVER Load The Strap Through The Cam Teeth From Front To Back, It Will Not Hold To The Proper Strength
Variations of Product Type 4808
There are no variations of Product Type 4808 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
