Details:
- 2 Inch Cam Buckle Tie Down
- CB2-3M 2 Inch Cam Buckle, Zinc-yellow
- CHS1V-3M Vinyl Coated S Hook on fixed end, CFBP2-5M Bolt Plate, angle up, on adjustable strap with sewn in pull loop next to buckle
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW2-Y6PE 2 Inch 6M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.69 lb
$18.19 Each
10+ = $16.47
50+ = $14.87
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, S Hook On One End, Bolt Plate On Opposite End
- One Piece Cam Buckle Configuration Has A Fixed End Sewn To The Back Of The Buckle And An Adjustable Strap Permanently Fed Through The Buckle To Prevent Removal
- Cam Buckle Tie-downs Are Pulled Tight By Hand, No Mechanical Tightening Mechanism
- Product Has A Sewn-in Pull Loop On Adjustable Strap To Make Tightening Easier
- S Hook Is Sewn On The End Of The Fixed End Strap
- There Is A Bolt Mounting Plate On The End Of The Adjustable Strap. The Bolt Plate Has A Slight Bend In The Frame. When Sewn, The Bend Is Angled Up Relative To The Buckle Lying Flat
- Cam Buckle Is The Utility Style Cam Buckle. This Type Of Cam Buckle Is Intended To Have The Adjustable Strap Loaded During Assembly An Left Inside The Buckle. It Is Not To Be Fed And Removed Repeatedly. The Adjustable Strap Is Loaded Through The Middle Opening On The Bottom Side Of The Buckle And Fed Back Thru The Teeth Of The Cam Buckle
- Cam Buckle Is Made Of Steel And The Frame Has A Zinc-yellow Plated Finish. The Cam Trigger Has A Zinc-silver Plated Finish
- Opening Of The S Hook Is Slightly Larger Than 1 Inch In Diameter To Alllow For Connection To A 1 Inch Round Bar Such As A Handlebar
- S Hooks Are Made Of Steel And Have A Black Vinyl Coating To Help Prevent Them From Scratching Their Surroundings
- Bolt Plate On The End Of The Adjustable Strap Has A Bolt Hole Opening Diameter Of 0.61 Inch To Fit A 1/2 Inch Bolt
- Bolt Plate Is Made Of Steel And Has A Zinc-yellow Plated Finish
- Strap Is Made With 6000 Lb Polyster Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Portion Only, The Cam Buckle And Hooks Are Not Included In The Measurement
- Product Is Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Adjustable Strap Near The Bolt Plate
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 4952
There are no variations of Product Type 4952 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
