Details:
- 1 Inch Strap
- CHS1V-2M Vinyl Coated S Hook on one end, one inch bolt loop (when laid flat) sewn on the opposite end for attachment to buckle
- Total Strap Length 1 Ft (12 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 2500 lb Break Strength
- 833 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.35 lb
$4.79 Each
10+ = $4.26
50+ = $3.84
This product is a special order item and cant be ordered online. Please contact Customer Service for assistance.
PRODUCT NOTES:
- Tie-downs, Strap Extender, S Hook On One End, Flat Sewn Loop On The Opposite End
- Strap Extender Configuration, Has No Tightening Mechanism, Sewn To A Specific Length
- This Configuration Is Commonly Used As A Replacement Fixed End Strap On The Back Of A Ratchet
- S Hook Sewn On One End Of The Strap
- Flat Loop On Opposite End Is Formed By Folding Over The Webbing Flat Onto Itself, No Twisting, Pinching Or Narrowing Of The Webbing
- The Flat Loop Is 1 Inch Long, Which Has A Circumference Of 2 Inches And Will Comfortably Fit Over A 0.50 Inch Diameter Round Bar Or Bolt
- S Hook Is A Commercial Grade Hook Providing Great Sttrength And Durability
- S Hook Is Made Of Steel And Has A Black Vinyl Coated Finish To Help Prevent Scratching Its Surroundings
- S Hook Is The Standard S Hook Configuration With One Closed Eye End And Hook End On The Oppsite Side. The Open Hook End Has A Hook Opening Diameter Of Greater Than 1 Inch To Fit Over A 1 Inch Diameter Bar Such As A Handlebar
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As The Webbing Only Including The Flat Sewn Loop. The S Hook Is Not Included In The Measurement
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The S Hook End Of The Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 4458
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 1936 | End-fitting/hook Is Made Of 304 Grade Stainless Steel |
