Details:
- 2 Inch Cam Buckle Tie Down
- No Strap Tag, CB2-3M Cam Buckle, COB2-4M Overcenter Buckle With Protective Webbing Pad Under Buckle On Opposite Side From Cam Buckle, Hook And Loop Securement Patches Sewn On
- CFBP2-5M Bolt Plate, angle up, at each end of tie-down
- Fixed End 0.33 Ft (4 Inches)
- Adjustable Strap 6.17 Ft
- Total Strap Length 6.5 Ft (78 Inches)
- CW2-K6PE 2 Inch 6M Black Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 2.03 lb
$76.39 Each
10+ = $69.53
50+ = $62.74
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Quick-adjust Tie-down, Bolt Plate On Both Ends
- One Piece Quick Adjust Tie-down, Combination Cam Buckle And Overcenter Buckle With Bolt Plates Sewn On Both Ends
- The Fixed End And Adjustable Straps On Both The Cam Buckle And Overcenter Buckle Are Non-removable, But Can Be Tightened As Needed
- This Quick Adjust Configurations Allows For Larger Adjustments And Easy Release Using The Cam Buckle, While The Overcenter Buckle Is Used To Provide The Final Tightening
- Cam Buckles Are Pulled Tight By Hand, There Is No Mechanical Tightening Mechanism
- The Adjustable Strap Is Sewn Through The Cam Buckle With A Pull Loop To Make Hand Tightening Easier
- The Overcenter Buckle Has A Sewn On Protective Pad Underneath It To Help Prevent Scratching The Surrounding Area Below
- The Bolt Plate Sewn On The End Of Each Strap Has A Slight Angle Bend In The Frame
- The Bolt Plates Are Orientated, Bend Angle Up, Relative To The Buckles Laying Flat
- Hook Material (of Hook And Loop) Is Sewn On The Underside Of The Cam Buckle Pull Loop, While Loop Material Is Sewn On The Top Of The Adjustable Strap
- The Hook And Loop Material Sections Are Pressed Together To Hold The Pull Loop End Of The Adjustable Strap Stationary
- Commercial Duty Cam Buckle For Great Strength And Durability
- Commercial Duty Overcenter Buckle For Great Strength And Durability
- Cam Buckle Is Made Of Steel And Has Zinc-yellow Plating On The Frame And Zinc-silver Plating On The Trigger For Superior Weather Protection
- Commercial Duty Angled Bolt Plate For Great Strength And Durability
- Bolt Plates Are Made Of Steel And Have A Zinc-yellow Plating For Superior Weather Protection
- Angled Bolt Plate Is Designed To Be Mounted With A 1/2 (0.50) Inch Bolt
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured From Center Of Bolt To Center Of Bolt Hole On Opposite End, All Materials Are Included In The Over All Length
- Product Is Sewn The Standard Method To Meet The Provided Strength Rating
- Sewn With The Standard Tie-down Stitch
- No Strap Warning Tag Or Label On The Product
- Overcenter Buckle Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 5406
There are no variations of Product Type 5406 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 1 arrow_forward Group = 66 arrow_forward Layout = 18 arrow_forward Config = 1910 arrow_forward Family = 1911 arrow_forward Type = 5406
Top = 1 arrow_forward Group = 66 arrow_forward Layout = 18 arrow_forward Config = 1910 arrow_forward Family = 1911 arrow_forward Type = 5406
