Details:
- 1 Inch Endless Loop Spring Buckle Tie Down
- Metal Belt Tip On End Of Strap
- CSB1N-2C 1 Inch Nickel Plated Spring Buckle
- Endless Loop (No Hooks)
- Total Strap Length 2 Ft (24 Inches)
- CW1-R8PP 1 Inch Heavyweight Red Polypropylene Webbing
- 200 lb Break Strength
- 67 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.13 lb
$5.89 Each
10+ = $5.24
50+ = $4.73
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Spring Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Spring Buckle Tie-Down Configuration, Strap Sewn To The Back Of The Buckle, It Has No Hooks
- To Use The Endless Loop Tie-down, Wrap The Strap Around The Cargo, Feed The Strap From Bottom To Top Through The Buckle And Pull Tight By Hand
- The Loose End Of Strap Has A Belt Tip Installed To Prevent Fraying And Make Feeding The Strap Easier
- Spring Buckle Has Nickel Finish
- Belt Tip On End Of Strap Is Nickel Plated, Same As Buckle
- Strap Is Made With Heavyweight Polypropylene Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured As Only The Webbing Portion From The Back Of The Buckle To The Tip Of The Loose End Of The Webbing
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Strap Next To The Buckle
- Spring Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Teeth From Top To Bottom, It Will Not Hold To The Proper Strength
Variations of Product Type 7078
There are no variations of Product Type 7078 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
