Details:
- 1 Inch Ratchet Strap
- CR1S-1M 1 Inch Stainless Steel Ratchet With Standard Handle
- CFBP1S-1M Stainless Steel Bolt Plate, Bend Angle Up, on fixed end strap, CHJW1V-3M Wide Opening Vinyl Coated Double J Hook, Hook Opening Up, on end of adjustable strap
- Fixed End 1 Ft (12 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 6 Ft (72 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 1000 lb Break Strength
- 333 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.02 lb
$21.99 Each
10+ = $19.92
50+ = $17.97
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ratchet Strap, Bolt Plate On One End, J Hook On The Opposite End
- Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
- Bolt Plate On The Fixed End Strap
- Bolt Plate Is Sewn To The Strap And Has A Mounting Hole To Be Mounted To An Anchor Point
- The Bolt Plate Has A Bend In The Frame And The Bend Is Orientated Up, Relative To The Buckle Lying Flat
- J Hook Sewn On The End Of The Adjustable Strap
- J Hook Is Orientated Hook Facing Up Relative To The Fold And Stitch
- Ratchet Is A Commercial Grade Buckle For Great Strength And Durability
- Ratchet Is Made Of 304 Grade Stainless Steel
- Ratchet Has The Standard Single Locking Configuration
- Ratchet Has A Thumb Style Handle, Which Is The Smallest Most Compact Style Of Handle
- Angled Bolt Plate Is Desgned To Be Mounted With Up To A 1/2 (0.50) Inch Bolt
- Bolt Plate Is Made Of 304 Grade Stainless Steel
- Double J Wire Hook On Adjustable Strap Has The Double J Configuration. It Is Made From A Single Piece Of Metal Wire And Formed Until Both Ends Of The Wire Are Shaped Into The Tip Of The Hook
- Double J Hook Is Made Of Steel And Finished With A Vinyl Coating To Help Protect Scratching Of Its Surrounding Areas
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle, Bolt Plate And J Hook Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CustomTieDowns Strap Warning Label Sewn On The Hook End Of The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 7591
There are no variations of Product Type 7591 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
