Details:
- 2 Inch Endless Loop Cam Buckle Tie Down
- Black Protective Pad Sewn Under Buckle
- CB2-3M 2 Inch Cam Buckle, Zinc-yellow
- Endless Loop (No Hooks), Strap End angle cut
- Total Strap Length 6 Ft (72 Inches)
- CW2-R16PP 2 Inch Heavyweight Red Polypropylene Webbing
- 1200 lb Break Strength
- 400 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.79 lb
$12.29 Each
10+ = $11.14
50+ = $10.06
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
- Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
- This Product Is Built Using A Utility Style Cam Buckle, Which Is The Stronger Cam Buckle Style, But Means The Loose End Of The Strap Must Be Fed Through The Teeth From Back To Front For Proper Operation
- End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
- Protective Pad Sewn Under The Cam Buckle To Help Prevent The Buckle From Scratching Its Surroundings
- Commercial Duty Utility Cam Buckle For Great Strength And Durability
- Utility Cam Buckle Is Made Of Steel And Has A Zinc-yellow Finish
- Strap Is Made With Heavyweight Polypropylene Webbing
- Sewn With Silver Polyester Thread
- Strap Length Measured As The Webbing Portion Only, The Buckle Is Not Included In The Measurement
- Sewn In The Standard Method To Meet The Provided Strength Rating
- Sewn With The Standard Tie-down Stitch
- CustomTieDowns Strap Warning Tag Sewn On The Strap Next To The Buckle
- Black Protective Pad Is Made From Heavyweight Polypropylene Webbing
- Utility Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Back Through The Front In Order To Properly Hold The Strap After Tightening. The Strap Can Be Loaded From The Middle Opening On The Bottom Of The Buckle And Fed Through The Teeth Back To Front Also. NEVER Load The Strap Through The Cam Teeth From Front To Back, It Will Not Hold To The Proper Strength
Variations of Product Type 7704
There are no variations of Product Type 7704 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 1 arrow_forward Config = 4558 arrow_forward Family = 4405 arrow_forward Type = 7704
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 1 arrow_forward Config = 4558 arrow_forward Family = 4405 arrow_forward Type = 7704
