Details:
- 1 Inch Strap
- Length From Strap Tip To Tip 5.125 (5-1/8) Inch
- 0.25 inch diameter melted hole 1/2 inch in from each end to center of hole
- Total Strap Length 0.427 Ft (5.1 Inches)
- CW1-K3PE 1 Inch 3M Black Polyester Tie-Down Webbing
- 2500 lb Break Strength
- 833 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.01 lb
$1.39 Each
10+ = $1.14
50+ = $1.03
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, Blank Hole On Each End
- Strap Extender Configuration, Blank Hole Melted On Each End
- Hole On Each End Is Created By Melting Through The Webbing So The Edges Of The Hole Are Seared To Prevent Fraying
- This Configuration Is Commonly Used As A Handle By Using A Common Fastener, Like A Bolt, Through Each Hole
- Melted Hole Has A Diameter Of 1/4 (0.25) Inch
- Holes Are Positioned 1/2 Inch To Center From Each End Of The Strap
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Strap Length Is Measured Tip To Tip Of The Webbing
- No Strap Tag Or Labeling On The Product
- No Instruction Sheet Included
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 7710
There are no variations of Product Type 7710 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 471 arrow_forward Config = 3201 arrow_forward Family = 3201 arrow_forward Type = 7710
Top = 1 arrow_forward Group = 7 arrow_forward Layout = 471 arrow_forward Config = 3201 arrow_forward Family = 3201 arrow_forward Type = 7710
