Details:
- 1 Inch Strap
- CHF1V-1M Vinyl Coated Flat Hook, hook facing down, on one end, 1 inch flat Sewn Loop on opposite end
- Total Strap Length 1 Ft (12 Inches)
- CW1-Y3PE 1 Inch 3M Yellow Polyester Tie-Down Webbing
- 1000 lb Break Strength
- 333 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.12 lb
$5.19 Each
10+ = $4.67
50+ = $4.21
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, Flat Hook On One End, Flat Sewn Loop On The Opposite End
- Strap Extender Configuration, No Buckle Included With The Product
- Product Is Commonly Used As A Replacement Fixed End For A Ratchet Strap
- Flat Hook On The First End Is Orientated, Hook Facing Down, Relative To The Sewing And Strap Tag
- On The Opposite End, There Is A 1 Inch Long Flat Sewn Loop
- The 1 Inch Flat Sewn Loop Is Formed By Folding The Webbing Flat On Top Of Itself, The Loop Has No Twisting, Narrowing Or Pinching In The Webbing
- 1 Inch Flat Sewn Loops Have A Circumference Of 2 Inches And Can Comfortably Fit Over A 1/2 (0.5) Inch Diameter Round Bar Or Bolt
- Commercial Duty Flat Hook For Great Strength And Durability
- Flat Hook Is Made Of Steel And Has A Black Vinyl Coated Finish To Help Prevent The Hook From Scratching The Surroundings
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Length Is Measured From The Tip Of The Sewn Loop To The Inside Edge Of The Flat Hook
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CTD Strap Warning Label Sewn On The Hook End Of The Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 7838
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 4709 | End-fitting/hook Has A Zinc-Yellow Plated Finish |
