Details:
- 3 Inch 29M High Tensile Polyester Webbing
- Cut to Length
- Total Strap Length 2 Ft (24 Inches)
- CW3-Y29HTPE 3 Inch 29M Yellow High-Tensile Polyester Webbing
- 29400 lb Break Strength
- 9,800 lb Working Load Limit
- Made in the USA
Product Weight: 0.34 lb
$4.19 Per Strap
10+ = $3.76
100+ = $3.40
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Component Only, Replacement Strap, No Hooks Or End-fittings On Either End
- Webbing Cut To A Specific Length
- Cut Webbing Is Guaranteed To Be Continuous, No Splices Or Cuts In The Length
- Each Cut End Of The Webbing Is Seared With A Hot Knife To Prevent Fraying Or Unraveling
- The Maximum Length Available Is Based On The Roll Size The Webbing Is Stored In
- 29400 Lb High Tensile Polyester Webbing Is Commonly Used In Tie-downs Because Of Its Superior Strength, UV Resistance And Abrasion Resistance, Along With Limited Stretch
- Webbing Has A Single Continuous Woven-in Marker Line Down The Middle
- There Is No Added Edge Color On This Webbing, The Edges Are The Same Color As The Webbing
- The High Tensile Weave Has A More Aggressive Texture. It Tends To Be Rougher And Stiffer Than Flat Weave Alternatives. The Weave Pattern Makes It Effective In Tie-downs Because The Buckle Can Grip The Weave Pattern Easier
- Super Duty Webbing For Strength And Durability That Exceeds All Other Components Of Its Width
- The Cut Strap Is Measured End To End
- Nominal Thickness 0.13 Inch
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 8074
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 8075 | Webbing Has A Black Edge On Both Sides |
