Details:
- 2 Inch Strap
- 0.75 Inch flat Sewn Loop on one End, CHD2N-7C Wire Formed D Ring on Opposite End
- Total Strap Length 10 Ft (120 Inches)
- CW2-Y12PP 2 Inch Lightweight Yellow Polypropylene Webbing
- 700 lb Break Strength
- 233 lb Working Load Limit
- Assembled in the USA
Product Weight: 0.42 lb
$7.09 Each
10+ = $6.39
50+ = $5.76
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Strap Extender, Flat Sewn Loop On One End, D-ring On The Opposite End
- Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
- 0.75 Inch Flat Loop Sewn On The End Of The Strap Is Formed By Folding The Webbing Flat On Top Of Itself, No Pinching, Narrowing Or Twisting Of The Webbing
- 0.75 Inch Flat Loop Has A 1.5 Inch Circumference And Can Fit Over A 0.40 Inch Diameter Round Bolt Or Pin
- D-ring, Which Is Shaped Like The Letter D, Is Sewn On The Opposite End To Provide An Anchoring Point
- Standard Duty D-ring Is Designed For General Use And Lighter Strength Applications
- D-ring Is Made Of Steel And Has A Nickel Lated Finish, Silver In Color
- Wire D-ring Is Formed By Bending Wire Into The Shape Of The Letter D And Welding The Ends Of The Wire Together. The Weld Point Is On The Flat Side Of The D-shape.
- Strap Is Made With Lightweight Polypropylene Webbing
- Sewn With Gray Polyster Thread
- Strap Length Is Measured From The Tip Of The Sewn Loop To The Inside Edge Of The D-ring
- Sewn In The Standard Method To Meet Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The D-ring End Of The Strap
- If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up
Variations of Product Type 8251
There are no variations of Product Type 8251 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
