Details:
- 2 Inch Ratchet Strap
- CRLW2-11M 2 Inch 11M Ratchet With Long Wide Handle And Aluminum Grip
- CHTS2-10M Twisted Snap Hook, hook facing down, with sewn-on CHDF2-10M Dee ring 12 inches from the snap hook, CPS2-k protective sleeve between hook and d-ring, on each end of the strap
- Fixed End 2 Ft (24 Inches)
- Adjustable Strap 9 Ft
- Total Strap Length 11 Ft (132 Inches)
- CW2K-Y12PE 2 Inch 12M Yellow Polyester Tie-Down Webbing With Black Edges
- 10000 lb Break Strength
- 3,333 lb Working Load Limit
- Assembled in the USA
Product Weight: 5.58 lb
$52.49 Each
10+ = $47.72
50+ = $43.06
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ratchet Strap, Twisted Snap Hook With D-ring On Both Ends
- Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
- There Is A Twisted Snap Hook On The End Of The Fixed End Strap And The Adjustable Strap
- The Twisted Snap Hook Is Orientated, Hook Facing Down, Relative To The Buckle Lying Flat
- The Twisted Snap Hook Has A Retainer Clip On The Hook To Help Prevent The Hook From Accidentally Disconnecting
- A D-ring Is Sewn 12 Inches From The Twisted Snap Hook On Both The Fixed And Adjustable Strap
- The Combination Twisted Snap Hook And D-ring Is Used By Connecting The D-ring And Snap Hook, Forming A Loop
- There Is A Protective Sleeve Between D-ring And Twisted Snap Hook To Help Prevent Premature Wear
- Heavy Duty Grade 11M Ratchet Buckle Designed For The Highest Strength And Durability
- Ratchet Is Made Of Steel. The Frame Of The Ratchet Has A Zinc-yellow Plated Finish And The Grip Is Made Of Ribbed Aluminum
- Ratchet Has The Standard Single Locking Configuration
- Ratchet Has A Long Wide Handle That Provides The Highest Amount Of Leverage And Makes Operation Easier While Wearing Gloves
- Heavy Duty Grade 10M Twisted Snap Hook Provides The Highest Strength And Durability Available
- Twisted Snap Hooks Are Made Of Steel And Have A Zinc-yellow Plated Finish
- Heavy Duty 10M Flat Stampled D-ring Provides The Highest Strength And Durability Available
- Flat Stampled D-rings Are Made Of Steel And Have A Zinc-yellow Plated Finish
- Strap Is Made With Heavy Duty 12000 Lb Polyester Tie-down Webbing
- Sewn With White Polyester Thread
- The Fixed End Strap Length Is Measured From The Back Of The Ratchet To The Sewn-on D-ring, The Extra 12 Inch Strap Length Covered By The Protective Sleeve And The Length Of The Twisted Snap Hook Is Not Included In The Fixed Length Measurement. The Adjustable Strap Length Is Measured From The Loose End Of The Strap To The D-ring. The D-ring, The 12 Inch Extension And Twisted Snap Hook Are Not Included In The Adjustable Strap Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CTD Strap Warning Tag Sewn On The Hook End Of Both The Fixed End And Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 8344
There are no variations of Product Type 8344 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
