Complete your order
Pricing & ordering
Choose your quantity and add this customized configuration to your cart.
$5.59 Each
10+ = $4.99
50+ = $4.51
Product at a glance
Details & specifications
Break strength
750 lb
Working load limit
250 lb
1 Inch Cinch-Strap Endless Loop Cam Buckle Tie Down
Components & materials
- CS1-1M 1 Inch Zinc Diecast Cam Buckle
- Endless Loop (No Hooks), Strap End angle cut
- CW1-R8PP 1 Inch Heavyweight Red Polypropylene Webbing
Dimensions
- Product weight: 0.19 lb
- Total Strap Length 2 Ft (24 Inches)
Additional details
- Adjustable Black Plastic 3-bar Slide On Strap
Product notes
- Tie-downs, Cam Buckle Tie-down, Buckle On One End, Strap Loops Back To Buckle
- Endless Loop Configuration Is Made With A Single Strap That Is Sewn To The Back Of The Buckle. The Strap Is Then Wrapped Around The Cargo And The Loose End Is Fed Back Thru The Buckle. There Are No Hooks, The Strap Just Makes A Loop When Tightened
- Cam Buckles Have No Built In Mechanical Tightening System, They Are Pulled Tight By Hand
- End Of The Strap Is Angle Cut To Make Feeding The Strap Thru The Buckle Easier
- Adjustable 3-bar Slide On The Strap To Use Holding The Excess Strap After Tightening
- Cinch Style Buckle Has The Cinch Cambuckle Configuration Where The Strap Is Fed Bottom Of Buckle Thru Top Of Buckle And Pulled Tight
- Cinch Cam Buckle Is Made From Zinc-Diecast Metal And Has A Zinc-silver Finish. Zinc-Diecast Buckles Are Rust Proof
- 3-bar Slide Is Made Of Molded Black Plastic
- Strap Is Made With Heavyweight Polypropylene Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Only, The Buckle Is Not Included In The Length
- Sewn In The Standard Method To Meet The Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On The Strap Next To The Buckle
Component specifications
Component strengths
| Model | Component | Break Strength | WLL |
|---|---|---|---|
| CW1-R8PP | 1 Inch Heavyweight Red Polypropylene Webbing | 800 lb | 267 lb |
| CFSAP1K-7X | 1 Inch Black Plastic 3 Bar Slide | 70 lb | 23 lb |
| CS1-1M | 1 Inch Zinc Diecast Cam Buckle | 1,300 lb | 433 lb |
Safety information
Special warnings
- Cinch Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Bottom To Top In Order To Properly Hold The Strap After Tightening. NEVER Load The Strap Through The Cam Teeth From Top To Bottom, It Will Not Hold To The Proper Strength
Additional views
Product images
Compare your options
Available Product Variations
Browse the default product for each available product type in this family. Color, length, and material can be adjusted on the product page.
PRODUCT MODELING
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 1 arrow_forward Config = 4018 arrow_forward Family = 1990 arrow_forward Type = 8367
Top = 1 arrow_forward Group = 2 arrow_forward Layout = 1 arrow_forward Config = 4018 arrow_forward Family = 1990 arrow_forward Type = 8367
