Details:
- 2 Inch Ratchet Strap
- CRSW2-4M 2 Inch 4M Ratchet With Wide Handle, Zinc-Yellow Plated
- 5 inch Narrowed sewn loop on the fixed end, CHS1V-3M Vinyl Coated S Hook on end of the adjustable strap
- Fixed End 0.67 Ft (8 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.67 Ft (68 Inches)
- CW2-Y6PE 2 Inch 6M Yellow Polyester Tie-Down Webbing
- 4000 lb Break Strength
- 1,333 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.97 lb
$18.49 Each
10+ = $16.80
50+ = $15.16
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ratchet Strap, Narrowed Sewn Loop On One End, S Hook On The Opposite End
- Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
- There Is A 5 Inch Narrowed Sewn Loop On The Fixed End
- Narrowed Sewn Loops Are Formed By Folding The Tip Of The Loop In Half And Sewing. The Tip Of The Loop Is 1/2 The Width Of The Original Webbing When Finished
- The 5 Inch Loop Length Is Measured When The Loop Is Lying Flat. 5 Inch Loop Length Has A 10 Inch Circumference And Will Fit Over A 3 Inch Diameter Round Bar
- S Hook Sewn On The End Of The Adjustable Strap
- CRSW2 Series Commercial Grade Ratchet Provides Proper Strength And Reliability
- Ratchet Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Ratchet Has A Standard Single Locking Configuration For The Easiest Ratcheting Operation
- Ratchet Has A Wide Handle, Which Makes Operation While Wearing Gloves Easier
- S Hook Has A Hook Diameter Opening Of 1.13 Inches Which Will Fit Over A 1 Inch Diameter Bar Such As A Handlebar
- S Hook Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent The Hook From Scratching Its Surroundings
- Strap Is Made Of 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Portion Only Including The Length Of The Loops. The Ratchet Is Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CustomTieDowns Strap Warning Tag Sewn On Both Fixed End Strap And The Adjustable Strap Near The S Hook
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 9398
There are no variations of Product Type 9398 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
