Details:
- 2 Inch Cam Buckle Tie-Down
- Black Hook And Loop Strap Holder Sewn Behind Buckle
- CB2-3M 2 Inch Cam Buckle, Zinc-yellow
- CFBP2-5M Bolt Plate, bend angle up, on Fixed End, Black CHROC2K-16M Roll-off Container Hook with pro sleeve, hook facing down, on end of Adjustable Strap with Sewn-in Pull loop next to the buckle
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW2-Y6PE 2 Inch 6M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 3.41 lb
$34.39 Each
10+ = $31.23
50+ = $28.19
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Cam Buckle Tie-down, Bolt Plate On One End, Roll-off Container Hook On The Opposite End
- One Piece Cam Buckle Tie-Down Configuration, Made Up Of A Fixed End Strap Sewn To The Buckle And An Adjustable Strap Fed Through The Buckle Then Sewn So The Strap Is Not Removable
- Cam Buckles Are Pulled Tight By Hand, There Is No Mechanical Tightening Mechanism
- The Adjustable Strap Is Sewn Through The Buckle With A Pull Loop To Make Tightening Easier
- Bolt Plate On The Fixed End Strap Has A Slight Angle Bend In The Frame. The Bolt Plate Is Orientated, Bend Angle Up, Relative To The Buckle Lying Flat
- Roll-Off Container Hook Sewn On The End Of The Adjustable Strap, Orientated Hook Facing Down, Relative To The Buckle Lying Flat
- There Is A Protective Sleeve Covering The Primary Strap Where The Strap And Roll-off Container Hook Are Connected. The Sleeve Helps Prevent Premature Wear In Primary Strap
- Hook And Loop Strap Sewn On The Fixed End Strap Directly Behind The Cam Buckle To Contain Any Excess Webbing After The Strap Is Tightened
- Cam Buckle Is A Utility Style Cam Buckle Designed To Have The Adjustable Strap Pre-fed Through The Buckle
- Cam Buckle Is Made Of Steel And Has Zinc-yellow Plating On The Frame And Zinc-silver Plating On The Trigger For Superior Weather Protection
- Commercial Duty Bolt Plate For Great Strength And Durability
- Bolt Plate Is Made Of Steel And Has A Zinc-yellow Plating For Superior Weather Protection
- Angled Bolt Plate Is Designed To Be Mounted With A 0.50 Inch Bolt
- Roll Off Container Hook Is Made Of Steel And Has A Black Resin Finish
- Roll Off Container Hook Is Designed To Hook Into The Slotted Openings In The Frame Of A Roll Off Container
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Length Only, Buckle, Bolt Plate And Hook Are Not Included In The Length Measurement
- Product Is Sewn The Standard Method To Meet The Provided Strength Rating
- Hook And Loop Strap Is Made With 1 Inch Wide Material
- CustomTieDowns Strap Warning Tag Sewn Next To The Bolt Plate On The Fixed End
- Hook And Loop Strap Holder Is Made With Black Back To Back Nylon Hook And Loop
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 9809
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 10890 | End-fitting/hook Has A Zinc-Yellow Plated Finish |
