Details:
- 1.5 Inch Ratchet Strap
- CRWPK15K-4M 1.5 Inch 4M Wide Handle Ratchet With Black Comfort Grip, Black Resin
- CHTS15-6M Twisted Snap Hook, Hook down, on fixed end, 2 Inch CFBP2-5M Bolt Plate, Bend Angle Up, on end of adjustable strap
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW15-Y4PE 1.5 Inch 4M Yellow Polyester Tie-Down Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.82 lb
$16.89 Each
10+ = $15.33
50+ = $13.83
Looking for Reseller or Volume Pricing? Give us a call at 1-877-360-5528
PRODUCT NOTES:
- Tie-downs, Ratchet Strap, Twisted Snap Hook On One End, Bolt Plate On The Opposite End
- Two Part Ratchet Strap, Made Up Of A Fixed End And Adjustable Strap. Adjustable Strap Is Separate From The Buckle Side And Is Fed Thru The Ratchet Spindle And Tightened During Use
- The Twisted Snap Hook Sewn On The Fixed End Has A Spring Loaded Retainer Clip That Helps Prevent The Hook From Unintentional Disconnects During Use
- The Twisted Snap Hook Is Orientated With The Hook Facing Down, When The Buckle Is Lying Flat
- The Bolt Plate Sewn On The End Of The Adjustable Strap Is Intended To Be Mounted With A Fastener So That The Adjustable Strap Is Permanently In Place
- The Bolt Plate Is The Angled Version, Which Means It Has A Slight Bend In The Frame. For This Product, The Bend Is Angled Up Relative To The Buckle Lying Flat
- Ratchet Is A Commercial Grade Buckle For Great Strength And Durability
- Ratchet Is Made Of Steel And Has A Black Resin Finish
- Ratchet Has The Standard Single Locking Configuration
- Ratchet Has A Wide Handle That Makes Operation Easier While Wearing Gloves
- Ratchet Handle Has A Black Comfort Grip For Ease Of Use
- Twisted Snap Hook Is The Heavy Duty Version For The Highest Strength And Durability
- Twisted Snap Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Angled Bolt Plate Is Desgned To Be Mounted With Up To A 1/2 (0.50) Inch Bolt
- Bolt Plate Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Strap Is Made With 4500 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As Only The Webbing Portion, Buckle And End-fittings Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- Bolt Plate On The End Of The Adjustable Strap Is A 2 Inch Fitting On A 1.5 Inch Strap. The Bolt Plate Will Have Some Play On The Strap Because Of The 2 Inch Width
- CustomTieDowns Strap Warning Label Sewn On The Hook End Of The Adjustable Strap
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 9941
There are no variations of Product Type 9941 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
