Details:
- 2 Inch Overcenter Buckle Tie Down
- Sublimation Imprinted, CUSTOM ARTWORK, printed continuously
- Black Protective Pad Sewn Under The Buckle
- COB2-4M 2 Inch Zinc-yellow Overcenter Buckle
- CFBP2-5M Bolt Plate, Angled up, on fixed end, CHSH2-6M Flat Snap hook on end of adjustable strap
- Fixed End 0.5 Ft (6 Inches)
- Adjustable Strap 5 Ft
- Total Strap Length 5.5 Ft (66 Inches)
- CW2-W6FPE 2 Inch 6M White Polyester Flat Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.65 lb
$30.39 Each
10+ = $27.49
50+ = $24.92
This product is a special order item and cant be ordered online. Please contact Customer Service for assistance.
PRODUCT NOTES:
- Tie-downs, Overcenter Tie-down, Bolt Plate On One End, Snap Hook On Opposite End
- 2 Part Overcenter Buckle Tie-down Has A Fixed End And A Separate Adjustable Strap
- Fixed End Strap Is Sewn At A Specific Length And Is Not Adjustable
- Loose End Of The Adjustable Strap Is Fed Through The Slots In The Overcenter Buckle And The Length Can Be Adjusted As Needed Until Tightened
- Overcenter Buckles Provide A Small Amount Of Tension When The Buckle Lever Arm Is Closed, But Will Only Be Tight If All The Slack Is Removed Before The Lever Arm Is Closed Shut
- Protective Pad Under The Buckle To Help Prevent Scratching The Surroundings
- The Bolt Plate Sewn On The Fixed End Has A Slight Angle Bend In The Frame
- The Bolt Plate Is Orientated, Bend Angle Up, Relative To The Buckle Laying Flat
- Snap Hook Has A Retainer Clip To Help Prevent Unintentional Disconnections
- Commercial Duty Overcenter Buckle For Great Strength And Durability
- Overcenter Buckle Is Made Of Steel And Has A Zinc-yellow Plated Finish For Superior Weather Protection
- Overcenter Buckle Is Secured With A Spring Loaded Latch, Latch Must Be Pressed In To Release The Lever Arm
- Commercial Duty Angled Bolt Plate For Great Strength And Durability
- Bolt Plate Is Made Of Steel And Has A Zinc-yellow Plating For Superior Weather Protection
- Angled Bolt Plate Is Designed To Be Mounted With A 1/2 (0.50) Inch Bolt
- Flat Snap Hook Is Made Of Steel And Has A Zinc-yellow Plated Finish
- Commercial Duty Flat Snap Hook For Great Strength And Durability
- Strap Is Made With 6000 Lb Polyster Tie-down Webbing
- Sewn With Silver Polyester Thread
- Strap Lengths Are Measured As The Webbing Length Only, And Includes The Loop On The Fixed End, Buckle And Hook Are Not Included In The Strap Length Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CTD Strap Warning Tag Sewn On Both Ends
- Black Protective Pad Is Made Of Heavyweight Polypropylene Webbing
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 14182
There are no variations of Product Type 14182 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
PRODUCT MODELING
Top = 1 arrow_forward Group = 4 arrow_forward Layout = 384 arrow_forward Config = 4924 arrow_forward Family = 5461 arrow_forward Type = 14182
Top = 1 arrow_forward Group = 4 arrow_forward Layout = 384 arrow_forward Config = 4924 arrow_forward Family = 5461 arrow_forward Type = 14182
