Details:
- 2 Inch Cam Buckle Fixed End
- Sublimation Imprinted, CUSTOM ARTWORK, printed continuously
- CB2-3M Utility Cam Buckle
- CHS1V-3M Vinyl Coated S Hook on the end
- Total Strap Length 1 Ft (12 Inches)
- CW2-W6FPE 2 Inch 6M White Polyester Flat Webbing
- 3000 lb Break Strength
- 1,000 lb Working Load Limit
- Assembled in the USA
Product Weight: 1.09 lb
$14.99 Each
10+ = $13.59
50+ = $12.29
This product is a special order item and cant be ordered online. Please contact Customer Service for assistance.
PRODUCT NOTES:
- Tie-downs, Cam Buckle Fixed End, S Hook On One End
- Cam Buckle Fixed End Configuration, Fixed End Only, Does Not Include The Adjustable Strap
- Cam Buckles Are Used By Feeding A Strap Through The Cam Teeth And Pulling The Strap Tight By Hand
- Utility Style Cam Buckle Is Loaded From Behind Or From The Underside Of The Teeth And Fed Through The Front, Then Pulled Tight
- S Hook Is Sewn On The End Of The Strap
- Commercial Duty Utility Cam Buckle For Great Strength And Durability
- Cam Buckle Is Made Of Steel And The Frame Has A Zinc-yellow Plated Finish. The Cam Trigger Has A Zinc-silver Plated Finish
- Heavy Duty S Hook For The Highest Strength And Durability
- S Hook Is Made Of Steel And Has A Black Vinyl Coating To Help Prevent The Hook From Scratching The Surroundings
- S Hook Is The Standard S Hook Configuration, One Closed End, One Open Hook End. The Open Hook End Has A Diameter Larger Than 1 Inch To Fit Over A 1 Inch Diameter Bar Such As A Handlebar
- Strap Is Made With 6000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Fixed Strap Length Is Measured As The Webbing Portion Only, Buckle And Hook Are Not Included In The Measurement
- Sewn In The Standard Method To Meet Provided Strength Rating
- CTD Strap Warning Tag Sewn On The Hook End Of The Strap
- Utility Style Cam Buckles Require That The Strap Be Fed Through The Teeth From Back Through The Front In Order To Properly Hold The Strap After Tightening. The Strap Can Be Loaded From The Middle Opening On The Bottom Of The Buckle And Fed Through The Teeth Back To Front Also. NEVER Load The Strap Through The Cam Teeth From Front To Back, It Will Not Hold To The Proper Strength
Variations of Product Type 4806
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 11818 | Made With A Custom Printed Strap Tag |
PRODUCT MODELING
Top = 1 arrow_forward Group = 31 arrow_forward Layout = 205 arrow_forward Config = 1526 arrow_forward Family = 1540 arrow_forward Type = 4806
Top = 1 arrow_forward Group = 31 arrow_forward Layout = 205 arrow_forward Config = 1526 arrow_forward Family = 1540 arrow_forward Type = 4806
