Details:
- 1 Inch 7C Cinch Style Zinc-Diecast Cam Buckle, Zinc-silver
- 750 lb Break Strength
- 250 lb Working Load Limit
- Quality Tested
Product Weight: 0.13 lb
$3.19 Each
100+ = $2.78
This product is a special order item and cant be ordered online. Please contact Customer Service for assistance.
PRODUCT NOTES:
- Component Only, Buckle, Cinch Cam Buckle, Hardware Only
- Cinch Style Cam Buckle, Component Only
- Cinch Style Cam Buckles Require That The Strap Be Fed From Below The Cam Teeth Opening And Out The Top To Properly Hold The Strap After Tightening
- Cam Buckles Are Pulled Tight By Hand. There Is No Mechanical Tightening Mechanism
- A Cam Buckle Is Made Up Of Two Parts, The Frame And The Cam Trigger That Hinges In The Frame
- The Cam Trigger Typically Has Teeth Or Holding Surface That When Pressed Against The Frame Holds Tight
- Cam Buckles Can Be Used In An Endless Loop Configuration Or As A 2 Part Tie-down With A Fixed End And Adjustable Strap
- Commercial Duty Cam Buckle For Great Strength And Durability
- Cam Buckle Is Made Of Zinc-diecast Material And Does Not Rust. The Buckle Has Zinc-silver Finish
- The Cam Buckle Has A Slightly Raised Release Trigger To Make Releasing The Strap Easier
- Noted Width Refers To The Size Of Strap The Buckle Is Designed To Be Used With
- Spring Is Connected To The Cam And Presses Against The Front Of The Frame
- This Cinch Cam Buckle Falls In The Commercial Duty Grade, But Is Slightly Lower Strength Than The Standard Product
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 3443
There are no variations of Product Type 3443 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.
