Details:
- 1 Inch Cinch Style Zinc-Diecast RT Cam Buckle
- 1300 lb Break Strength
- 433 lb Working Load Limit
- Quality Tested
Product Weight: 0.15 lb
$2.89 Each
400+ = $2.53
This product is a special order item and cant be ordered online. Please contact Customer Service for assistance.
PRODUCT NOTES:
- Component Only, Buckle, Cinch Cam Buckle, Hardware Only
- Cinch Style Cam Buckle, Component Only
- Cinch Style Cam Buckles Require That The Strap Be Fed From Below The Cam Teeth Opening And Out The Top To Properly Hold The Strap After Tightening
- Cam Buckles Are Pulled Tight By Hand. There Is No Mechanical Tightening Mechanism
- A Cam Buckle Is Made Up Of Two Parts, The Frame And The Cam Trigger That Hinges In The Frame
- The Cam Trigger Typically Has Teeth Or Holding Surface That When Pressed Against The Frame Holds Tight
- Cam Buckles Can Be Used In An Endless Loop Configuration Or As A 2 Part Tie-down With A Fixed End And Adjustable Strap
- Heavy Duty Cinch Cam Buckle For The Highest Strength And Durability
- Cam Buckle Is Made Of Zinc-diecast Material And Does Not Rust. The Buckle Has Zinc-silver Finish
- The Cam Buckle Has A Slightly Raised Release Trigger To Make Releasing The Strap Easier
- Noted Width Refers To The Size Of Strap The Buckle Is Designed To Be Used With
- Spring Is Connected To The Cam And Presses Against The Solid Middle Bar Behind The Cam
-
There are no special warnings for this product. Please see our Safety Warnings page for standard product warnings.
Variations of Product Type 7618
**Links below connect to the default product of the variation, make sure to adjust color, length or material as needed.
| Variation ID | Variation Difference |
|---|---|
| 2593 | Has A Standard Release Trigger |
