HOME
PRODUCT NUMBER : 10014
|
|
|
$6.19 per each |
|
|
|
|
CUSTOM IMPRINT
|
SEE ALL VARIATIONS OF PRODUCT 10014
|
PRODUCT NOTES:
- Tie-downs, Anchoring Tie-down, Bolt Plate On One End Of The Strap, Double D-ring Combination After Bolt Plate
- Anchoring Strap Configuration, Bolt Plate On The End Of The Strap, Combo Double D-rings Sewn-in Looped 5 Inches From Bolt Plate
- Bolt Plate On One End Of The Strap Has A Slight Bend. The Bend Is Orientated, Bend Angle Up, Relative To The Topside Of The Strap And The D-rings
- The Bolt Plate Has A Mounting Hole To Anchor The Strap Using A Bolt Or Screw
- The Strap Is Tightened By Weaving The Loose End Of Strap Thru The Middle Of Both D-rings, Fed Back Between D-rings And Pulled Tight
- The CFBP1 Angled Bolt Plate Is Designed To Be Mounted With A 0.50 Inch Bolt
- Bolt Plate Is Made Of Steel And Is Zinc-yellow Plated For Superior Weather Protection
- D-rings Are Made From Metal Wire And Formed In The Shape Of The Letter D
- D-rings Are Made Of Steel And Have A Bright Nickel Plationg
- Strap Is Made With 3000 Lb Polyester Tie-down Webbing
- Sewn With Silver Polyester Thread
- Product Is Not D.O.T. Rated, Not Intended For Highway Or Transportation Use
- Strap Lengths Are Measured As The Primary Webbing Length Only, Bolt Plate And D-ring Loop Are Not Included In The Length Measurement
- Product Is Sewn The Standard Method To Meet The Provided Strength Rating
- No Strap Warning Tag Or Labeling On The Product
|
|
PRODUCT WARNINGS:
- Product Has No Applicable Strength Rating And Is Not Intended For D.O.T. Or Highway Cargo Transport
|
|
INCLUDES (COMPONENTS & DETAILS): (Links below open a new window)
|
|
Assembled By: CustomTieDowns.com |
|
Product Weight: 0.38 lb per each |
|
2024-05-07
|
Variations of Product Type 2074
There are no variations of Product Type 2074 currently available.
If you would like assistance with a new variation, email CTD customer service at sales@customtiedowns.com
or Call customer service at 1-877-360-5528, M-F during business hours.