2 INCH STRAP EXTENDERS

• Tie-downs, Strap Extender, Flat Sewn Loop On One End, D-ring On The Opposite End
• Strap Extender Configuration, Strap Only, Sewn To A Specific Length, Has No Tightening Mechanism
• 0.75 Inch Flat Loop Sewn On The End Of The Strap Is Formed By Folding The Webbing Flat On Top Of Itself, No Pinching, Narrowing Or Twisting Of The Webbing
• 0.75 Inch Flat Loop Has A 1.5 Inch Circumference And Can Fit Over A 0.40 Inch Diameter Round Bolt Or Pin
• D-ring, Which Is Shaped Like The Letter D, Is Sewn On The Opposite End To Provide An Anchoring Point
• Standard Duty D-ring Is Designed For General Use And Lighter Strength Applications
• D-ring Is Made Of Steel And Has A Nickel Lated Finish, Silver In Color
• Wire D-ring Is Formed By Bending Wire Into The Shape Of The Letter D And Welding The Ends Of The Wire Together. The Weld Point Is On The Flat Side Of The D-shape.
• Strap Is Made With Lightweight Polypropylene Webbing
• Sewn With Gray Polyster Thread
• Strap Length Is Measured From The Tip Of The Sewn Loop To The Inside Edge Of The D-ring
• Sewn In The Standard Method To Meet Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn On The D-ring End Of The Strap

• If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up