BOAT WINCH STRAPS - 2 INCH

• Tie-downs, Boat Winch Strap, Snap Hook On Each End Of Y-strap, Flat Sewn Loop On Opposite End
• 3 Point Strap Configuration Is Made Up Of A Primary Strap And A Crossmember Strap That Are Sewn Onto Each Other
• The Primary Strap And Crossmember Strap Are Orientated Perpendicular To Each Other With A Snap Hook On Each End Of The Crossmember Strap
• The Snap Hooks Have A Retainer Clip That When Hooked On Helps Prevent The Hook From Unintentionally Disconnecting
• Product Is Commonly Used As A Winch Strap When The Boat Has Bow Connections On Each Side Instead Of A Single Eye On The Tip Of The Bow
• 10M Forged Snap Hooks Are The Heavy Duty Model And Are Slightly Thicker Than The Corresponding Flat Snap Hook
• Snap Hooks Are Made Of Steel And Have A Zinc-silver Plated Finish
• Strap Is Made With 6000 Lb Seatbelt Style Polyester Webbing. Webbing Nominal Thickness Is 0.049 Inch (1.2mm)
• Sewn With White Polyester Thread
• The Crossmember Strap Is 52 Inches And Is Measured Center To Center Of The Snap Hook Openings. The Length Of The Primary Strap Portion Of The Product Is Tip To Tip Of The Strap
• Sewn In The Standard Method To Meet Provided Strength Rating
• CustomTieDowns Strap Warning Tag Sewn Where The Crossmember And Primary Straps Connect

• If Winding This Strap In A Boat Winch, Check That The Combination Of Strap Length And Webbing Thickness Will Fit In The Boat Winch When Wound Up